European customers order 80,000 sets of micro inverter Betteri bc01 Connector
European customers order 80,000 sets of micro inverter Betteri bc01 Connector
.
This year, due to policies and people's emphasis on clean energy and environmental protection, the photovoltaic market is extremely hot. Many countries have started to build large-scale photovoltaic power plants. Among them, distributed photovoltaic is loved by many families. So what is distributed photovoltaic power generation?
Distributed photovoltaic power plants usually refer to power generation systems that use distributed resources, have a small installed capacity, and are arranged near users. It is generally connected to a power grid with a voltage level of less than 35 kV or lower. Distributed photovoltaic power station specifically refers to a distributed photovoltaic power station system that uses photovoltaic modules to directly convert solar energy into electrical energy. Among them, household photovoltaic is a kind of distributed photovoltaic, which has a small installation capacity and many installation points, and is usually installed on the roof of the residents themselves.
The DC power conversion of the micro-inverter is AC from a single solar module. Each solar cell module is equipped with an inverter and a converter function. Each component can perform current conversion independently, so this is called "micro-inverter device".
Micro inverters are capable of maximum power point tracking (MPPT) at the component level, offering advantages over centralized inverters. In this way, the output power of each module can be optimized to maximize the overall output power. Each inverter relies on a wiring harness to connect to each other.
Mains connection cable, for AC connection of the mirco inverter to a Schuko socket. Cable Diameter: 10mm.
On one side with mounted Betteri BC01 (female) power connection socket, the other side with Schuko plug.
The H07RN-F 3 x 1.5 mm² rubber cable is approved according to VDE 0282 for use under heavy use, in dry and damp rooms as well as outdoors and in use water from -30 to 60 °C.
Micro inverter wiring harness bc01 plug is the most common type especially in Europe such as Germany.
A few days ago, an old customer who had purchased photovoltaic cables from KUKACABLE asked if we could produce and sell micro-inverter wiring harnesses, requiring the use of BC01 plugs and H07RN-F rubber cables, which are in compliance with VDE certification. We immediately contacted the manager of the production department to evaluate the quotation and sample production. We send a sample to the customer to confirm whether it matches the micro inverter sold in his store. After the customer confirms that the samples are correct, mass production will begin, and shipments will be made before November 25.
KUKACABLE With professional product research and development laboratory and large-scale factory production line. Products are exported to America, Europe, the Middle East, the Middle East and other more than 120 countries. Southeast Asia, Africa, etc., with various national testing institutions professional certification.
We continue to deepen and expand products in the photovoltaic vertical field, develop more photovoltaic-related cables, and provide customers with one-stop photovoltaic services. I am also very grateful to customers for their trust in KUKACABLE, and I will work harder in the future to live up to your trust.
